top of page

Flame & Detonation Arrestors

Flame & Detonation Arrestors are key components commonly used in the design of your flare system to prevent the propagation of flame fronts into your piping systems. We offer both Deflagrations (Flame) Arrestors to be used near the source, and Detonation Arrestors which are designed to be used in piping systems.

KSPC - KSFI Deflagration Inline Flame Arrestor (1)_edited.png

PREVENT THE PROPOGATION OF FLAME FRONTS ON YOUR SYSTEMS

FLAME ARRESTORS

DETONATION ARRESTORS

INLINE DETONATION ARRESTORS

INLINE DETONATION ARRESTOR

  • Operating Temperature @ Pressure - KFD / DN 15 ~ DN 300 +60°C/140°F @ 1.1 bar abs

  • Made from reliable materials (nodular iron, cast steel, SS304, SS316, SS316L with various trims)

  • A range of sizes available to fit your existing equipment (DN 15 ~ DN 300 with  ANSI 150lb flanges)

  • Flame cell: NEC group D or IEC IIA Gases (Other gas groups all available as extras)

  • Optimum/Optional Design & Arrangements - Stem Jacket type, Steam Tracing type

KSPC - KSFD Inline Detonation Flame Arrestor

KSPC - KFD Inline Detonation Flame Arrestor_edited.png

INLINE DETONATION ARRESTOR

  • Operating Temperature @ Pressure - KSFD / DN 25 ~ DN 150 +90°C/194°F @ 1.2 bar abs; KSFD / DN 200 ~ DN 400 +90°C/194°F @ 1.1 bar abs

  • Made from reliable materials (cast steel, SS304, SS316, SS316L with various trims)

  • A range of sizes available to fit your existing equipment (DN 25 ~ DN 400 with ANSI 150lb flanges)

  • Flame cell: NEC group D or IEC IIA Gases (Other gas groups all available as extras)

  • Optimum/Optional Design & Arrangements - Stem Jacket type, Steam Tracing type

KSPC - KSFC Inline Detonation Flame Arrestor

INLINE DETONATION ARRESTOR

  • Operating Temperature @ Pressure - KSFLD / DN 50 ~ DN 300 +60°C/140°F @ 1.1 bar abs​

  • Made from reliable materials (nodular iron, cast steel, SS304, SS316, SS316L with various trims)

  • A range of sizes available to fit your existing equipment (DN 50 ~ DN 300 with ANSI 150lb flanges)

  • Flame cell: NEC group D or IEC IIA Gases (Other gas groups all available as extras)

  • Optimum/Optional Design & Arrangements - Stem Jacket type, Steam Tracing type

KSPC - KSFLD Inline Detonation Flame Arrestor

KSPC - KSFD Inline Detonation Flame Arrestor_edited.png
KSPC - KSFF Inline Detonation Flame Arrestor_edited.png

DEFLAGRATION FLAME ARRESTORS

DEFLAGRATION FLAME ARRESTOR

  • Operating Temperature @ Pressure - KSFE / DN 50  ~ DN 300 +90°C/194°F @ 1.1 bar abs

  • Made from reliable materials (aluminum, nodular iron, cast steel, SS304, SS316, SS316L with various trims)

  • A range of sizes available to fit your existing equipment (DN 50 ~ DN 300 with ANSI 150lb flanges)

  • Flame cell: NEC group D or IEC IIA Gases (other gas groups all available as extras)

  • Optimum/Optional Design & Arrangements - Stem Jacket type, Steam Tracing type

KSPC - KSFE Deflagration Flame Arrestor

KSPC - KSFE Deflagration Flame Arrestor image (1)_edited.png

DEFLAGRATION FLAME ARRESTOR

  • Operating Temperature @ Pressure - KSFH / DN 50 ~ DN 350 +60°C/140°F @ 1.1 bar abs

  • Made from reliable materials (aluminum, nodular iron, cast steel, SS304, SS316, SS316L with various trims)

  • A range of sizes available to fit your existing equipment(DN 50 ~ DN 300 with ANSI 150lb flanges)

  • Flame cell: NEC group D or IEC IIA Gases (other gas groups all available as extras)

  • Optimum/Optional Design & Arrangements - Stem Jacket type, Steam Tracing type

KSPC - KSFH Deflagration Flame Arrestor

KSPC - KSFH Deflagration Inline Flame Arrestor_edited.png

DEFLAGRATION FLAME ARRESTOR

  • Operating Temperature @ Pressure - KSFI / DN 15 ~ DN 600 +60°C/140°F @ 1.1 bar abs

  • Made from reliable materials (aluminum, nodular iron, cast steel, SS304, SS316, SS316L with various trims)

  • A range of sizes available to fit your existing equipment  (DN 15 ~ DN 600 with ANSI 150lb flanges)​

  • Flame cell: NEC group D or IEC IIA Gases (other gas groups all available as extras)

KSPC - KSFI Deflagration Flame Arrestor

KSPC - KSFI Deflagration Inline Flame Arrestor (1)_edited.png

DEFLAGRATION FLAME ARRESTOR

  • Operating Temperature @ Pressure - KSFL / DN 50 ~ DN 300 +60°C/140°F @ 1.1 bar abs

  • Made from reliable materials (aluminum, nodular iron, cast steel, SS304, SS316, SS316L with various trims)

  • A range of sizes available to fit your existing equipment (DN 50 ~ DN 300 with ANSI 150lb flanges)

  • Flame cell: NEC group D or IEC IIA Gases (other gas groups all available as extras)​

  • Optimum/Optional Design & Arrangements - Stem Jacket type, Steam Tracing type

KSPC - KSFL Deflagration Flame Arrestor

KSPC - KSFL Deflagration Inline Flame Arrestor.png
bottom of page